RMON Group 2 (History) Window
You can enter this window from
1.
The Main Window Menu Bar
(
Monitor: RMON Group 2
)
2.
From the device window menu bar for certain devices.
Figure 30. RMON Group 2 Window.
Information presented in the window includes:
The
History Control Table.
This table presents control entries for RMON Group 2
(History). Each interface may have several corresponding entries in this table (the default is
two entries per interface, with long and short reporting intervals). The table usually contains
entries for all the device interfaces, but it may also be empty. If the table is empty, it is due
to one of the following reasons:
•
RMON Group 2 is not supported on this device.
•
RMON Group 2 is supported but there are no control entries. You can create a control
entry by clicking the
Create
button. The "
Add RMON Group 2
” Window opens.
