Using Passwords
In its default configuration, MegaVision requires a password to login. You can also set up the
Password window to start the program without a password..
To Change Password Settings As A User Or Supervisor
1.
From the Options menu, choose
Passwor
d. The Password dialog box opens.
Figure 2. Password Window
2.
Enter your correct Old password.
Note
: If you are logging in as a supervisor for the first time, press Tab in the Old
Password field. If you are logging in as a user, enter the default password (default is
USER).
3.
Enter your new password in the New password field.
4.
Enter your new password in the Verify Password field for confirmation.
5.
To bypass the Login window at startup, uncheck the Password Required check box.
6.
Choose
OK
to accept the changes and exit the Password window. Choose
Cancel
to
close the window without performing any changes.
