PIB-05
18 Feb 2015
PRODUCT INFORMATION BULLETIN
Suction Loading Station
1-8
10. Install and secure all hoses.
11. Service chassis hydraulic system.
Suction Hoses
1.
Install
foot
valve
on
suction
hose.
Use
liquid
pipe
sealant
on
pipe
threads.
2. Stow hoses in the storage tubes.
CONFIGURATION OF CAB CONTROL SWITCH BOX FOR SUCTION LOADING STATION (DiSCS ONLY)
Every DiSCS Gen 1.5 system is given a specific 10 digit line code (found in the Installation Drawing Package)
that determines what options that specific tank has available. Existing can control systems must be configured
to work with the suction loading station.
Switch Installation
Remove the blank AUX2 cover switch and replace it with the supplied black on/off switch (Mega Part
No. 306968). The AUX2 switch is located in the second row of switches from the top, as shown below:
The following is the procedure for replacement of a switch in the Gen. 1.5 main switch box.
This procedure must be followed to reduce the potential for damage to the box and components contained in
the box. Failure to follow this procedure may result in component damage and spray system malfunction.
1. Secure unit. Ensure unit is safe for service.
2. Locate replacement switch (Mega Part No. 306968).
AUX2
Add Switch (Mega Part Number 306968)