93
Appendix C: Autotracking (Selected Models Only)
The Autotracking function is only for some selected models. This function will only become
available after authentication is done. For more information about authenticating the
function, please see section: Inset Key from below.
The Autotracking function will automatically detect a moving object in the preset area and
follow it according to the defined settings. Please find the function setting in the following
path:
System> Autotracking
.
Click on the category <Autotracking>, the <Autotracking> and <Insert Key> tabs will be
shown in the drop-down menu. Enter the setting menu by clicking the <Autotracking> tab.
Autotracking
Autotracking
The default setting of the Autotracking function is <Off>. Select <On> to enable the
function.
NOTE:
Setting items will be available after <On> is selected.
MAX Limit Setting
This setting menu allows users to define a tracking area for the detection and tracking
movement of the camera.
Turn Off
To avoid the setting process being disturbed by the camera
’s tracking movement,
please click on the <Turn Off> button to switch off the tracking function.
NOTE:
The Autotracking function needs to be reactivated to take effect after
saving all the necessary settings. Please follow the steps below.
Select <Off> under <Autotracking> at the top.
Click the <Save> button for confirmation.
Select <On> under <Autotracking> at the top.
Click the <Save> button to confirm the settings.