48
PTZ Function
Assign a camera function: Preset, Sequence, Autopan or Cruise, and
specify a Preset Point / Sequence Line / Autopan Path / Cruise Line for
the camera to perform at an alarm occurrence.
NOTE:
Please refer to the sections through
Preset Programming
to Sequence Line Programming
for details of Preset Point /
Cruise Line / Autopan Path / Sequence Line setups.
If the selected function is <Preset>, it is required to enter its dwell time (1
to 256 sec.) in the corresponding field. When the alarm is triggered, the
camera will go to the selected Preset Point and stay there for a
user-defined period of time. As for other function modes, the camera will
keep executing the specified function; to stop the performance, simply
change the camera
’s status.
NOTE:
The dwell time is only adjustable when <Preset> is
selected. When the dwell time is up, the camera will go back to
its trigger position and recheck the alarm pin status.
Send HTTP notification
Check this item, select the destination HTTP address, and specify the
parameters for event notifications by <Alarm> triggered. When an alarm
is triggered, the notification can be sent to the specified HTTP server.
For instance, if the custom parameter is set as
“
action=1&group=2
”, and
the HTTP server name is
“
http://192.168.0.1/admin.php
”, the notification
will be sent to HTTP server as
“
http://192.168.0.1/admin.php?
action=1&group=2
” when alarm is triggered.
Record Video Clip
Check the item and select a video recording storage type, <SD Card> or
<NAS> (Network-Attached Storage). The alarm-triggered recording will
be saved into the microSD card or the NAS.
Pre-trigger buffer recording function allows users to check what
happened to cause the trigger. The pre-trigger buffer time range is from
1 to 3 sec. Select <Upload for __ sec> to set the recording duration after
alarm is triggered. The setting range is from 1 to 99999 sec. Select