84
2.5.3
Auto Pan
The Auto Pan Programming can be found under this path:
PTZ> Auto Pan
.
The camera supports 4 Auto Pan Paths. Please refer to the instructions below
to set an Auto Pan Path.
Auto Pan Setting
To setup an Auto Pan Path, firstly, please select a path number from the
drop-down list. Secondly, select the speed ratio from the <Speed> drop-down
list; the speed ratio ranges from 0 (low) to 3 (fast). Thirdly, choose to run the
Auto Pan Path in right / left direction from the <Direction> drop-down list.
Then move the cursor to the live view pane, and move the camera to a desired
view as the Start Point of an Auto Pan Path. Click on <Set> of the <Start Point>
and the current view will be automatically saved as the start point of the Auto
Pan Path. Lastly, move the camera to another desired position as the end point
of the Auto Pan Path. Click on the <Set> button of the <End Point> for saving
the setting.
NOTE:
The zoom ratio of an Auto Pan
’s Start Point will persist
throughout the whole path.
Auto Pan Run
Select the specified Auto Pan Path from the drop-down list, click on the <Run>
button, and then the camera will start moving horizontally as recorded.
To view the camera panning in full screen mode, please move the cursor onto
the live view pane, right-click and left-click to select
“full screen”. Then users can
view the camera navigation in full screen.
To stop running an Auto Pan Path, simply move the cursor to the live view pane
and move the camera in any direction.