EN
28
of up to 6 mm. The tool must only be used for
its intended purpose and in accordance with
these instructions. The tool is only intended
for household use. All other use is considered
to be unsuitable. Incorrect use, inadequate
maintenance and/or illicit use of the tool
can result in serious personal injury and/or
material damage. The manufacturer cannot
accept liability for personal injury or material
damage resulting from improper use.
CHARGING
WARNING!
Only charge the battery with the charger
recommended by the manufacturer.
NOTE:
• The battery is only partially charged on
delivery. Charge the battery for at least 1
hour before using it for the first time.
• Lithium-ion batteries can be charged at
any time without affecting their lifespan.
Interrupting the charging will not damage
the battery.
• If the battery charging indicator goes red
during use then the battery has a charge
of less than 30% left. Charge the battery
as soon as possible.
• Charging temperature: 10 to 40°C.
• Check the battery charge status regularly if
the tool is not going to be used for a long
time. The optimum charge is 50 to 80%.
1. Connect the charging cable to the driver
socket.
FIG. 2
2. Connect the charger to a power point.
3. The battery is fully charged when the
charge indicator goes from red to green.
safety precautions are required to protect
the user, based on an estimate of exposure
in actual operating conditions (taking into
account all stages of the work cycle, e.g. the
time when the tool is switched off and when
it is idling, in addition to the start-up time).
DESCRIPTION
Versatile battery-powered mini-driver with right
and left drive, LED light, battery indicator, four
replaceable heads, bit holder with 28 bits, tool
bag with carry handle and 230 V charger.
1.
Rotation selector/safety lock for power switch
2. Indicator for right drive
3. Battery charge status
4. Indicator for left drive
5. Charger connection (tool)
6. Power switch
7. LEDs
8. Bit holder
9. Charger
10. Chuck attachment
11. Lock button
12. Excentre attachment
13. Right angle attachment
14. Cutter attachment
15. Bits and bit extension
FIG. 1
USE
IMPORTANT:
The tool is intended for screw driving
in wood, plastic and metal. The cutter
attachment is only intended for cutting soft
material, such as paper etc. with a thickness
Summary of Contents for 004951
Page 4: ...1...
Page 5: ...2 4 6 3 5 7...
