EN
47
Maintenance table
Tasks
Before each
use
25 hours
100 hours
After each use
Screws/bolts – inspect and
tighten
X
Motor and air filter – check and
clean as needed
X
Motor oil – check the oil level
X
Clean the sweeper – remove
fat, dirt and debris
X
TROUBLESHOOTING
The motor does not start
Check that the spark plug is not damaged
Make sure that the spark plug cover is correctly
mounted
The motor runs unevenly
Check that the choke is not activated
Make sure that the fuel is not polluted
The brushes do not rotate
Check that the belt connection is set correctly
Make sure that the cone belt is whole
The sweeper does not drive
Check that the belt connection is set correctly
Make sure that the cone belt is whole
The sweeper is not effective
Check that the brush’s distance to the ground is
set correctly.
