EN
46
Support wheels and height of brushes
As the brushes are worn down, their height must be adjusted so that they are close enough to the
ground in order to be able to sweep.
1.
Remove the lock pin (figure 6)
2.
Raise the wheels’ bar (figure 7) and replace the lock pins in the new position (figure 8). This
sets the support wheel at a higher position and sets the brush closer to the ground.
MAINTENANCE
Service and repair
• Carry out repairs and adjustments in an area at a safe distance from traffic and other dangers.
• Disconnect the spark plug contact from the spark plug before making adjustments or servicing.
• Contact authorised personnel if the belts need to be replaced. Do not replace them yourself.
Storage
• Do not store the sweeper with weight on the brush. The weight can deform the brush and reduce
its effectiveness.
• Do not store polypropylene brushes in direct sunlight. The material can become brittle and break
before the brushes are worn out.
• Keep polypropylene brushes away from high heat or flames.
6
7
8
