26
ENGLISH
Exposure to loud noise can cause hearing
impairments.
•
Wear ear protection.
If there is a fault on the equipment:
•
Read these instructions.
•
Contact your dealer if you cannot solve the problem.
SAFETY PRECAUTIONS
Working environment
1.
Maximum permitted humidity: 80 %.
2.
Temperature: -10 to 40°C.
3.
Do not work in the rain or in direct sunlight.
4.
Do not work in an atmosphere that contains large amounts of dust or corrosive gas.
5.
Do not work in strong draughts.
Safety instructions
1.
Ventilation
The machine is fan cooled.
IMPORTANT:
Never cover or block the ventilation openings on the machine. Leave at least 0.3 m of
free space round the machine to ensure adequate ventilation.
2.
Avoid overloading.
The overload protection will trip and switch off the machine if it is overloaded. Do not switch off the
machine with the switch, but allow the fan to run. The machine will be reactivated when it has cooled
to normal temperature.
3.
Avoid overvoltage
Do not exceed the permitted input voltage in the technical data, this could damage the machine.
4.
The machine casing must be connected to earth with a conductor with a cross section of at least 10
mm², connected to the earth terminal on the machine.
5.
Never touch live parts – risk of electric shock.
TECHNICAL DATA
Voltage, frequency (VAC, Hz)
T
ZR
-phase
0 ± 15%, 50/60
Input current (A)
No-load voltage (V)
55
Settings range, welding current (A)
10–180
Rated voltage (V)
17
Arc length regulation (A)
–
Gas afterflow (s)
2,5
Current reduction (s)
–
Duty factor (%)
60
Noload loss (W)
40
Arc ignition
HF
Efficiency (%)
85
Power factor
0,93
Insulation class
B
Protection rating
IP21
Weight (kg)
8,0
Dimensions (mm)
371 x 155 x 295
