EN
37
Replace any damaged parts with new
ones with the same technical data in
accordance with these instructions.
• Keep the product clean. Clean the product
after use and before putting it away.
Proper maintenance and regular cleaning
are essential for the product to work
satisfactorily.
• Clean the ventilation openings (8) on the
product after use. Use a brush for parts
difficult to get at.
• The product can be cleaned with
compressed air (max 3 bar).
• Always check the product, the power cord
and plug for damage before use. Do not
use the product if it is damaged.
• Check for any damaged parts. Take the
product to an authorised service centre,
or other qualified personnel, to be
checked and repaired.
NOTE:
Do not use strong or abrasive chemicals.
Polishing bonnet
• Remove the bonnet (11) according to the
instructions above.
• Wash the bonnet by hand in warm (max
30°C) water, or if necessary with a mild
soapy solution. Rinse thoroughly with
clean water.
• Allow the bonnet to dry before using it
again or putting it away.
Power cord
A damaged cord or plug must be replaced
by an authorised service centre or qualified
person to ensure safe use.
Summary of Contents for 014138
Page 4: ...1 1 1 2 3 4 5 6 7 8 9 10 11 3 8 11 ...
Page 5: ...3 4 4 ...
