EN
34
are available in Jula’s department stores and at
www.jula.com.
1. Spindle
2. Spindle lock button
3. Handle
4. Speed control
5. Power switch lock button
6. Power switch
7. Ventilation openings
8. Support handle
9. Disc support plate with velcro fastener
10. Polishing bonnet
11. Hex key
FIG. 1
HOW TO USE
WARNING!
• Pull out the plug before assembly,
adjusting or cleaning the polishing
machine.
• Check that the mains voltage
corresponds to the rated voltage on the
type plate.
• Check that accessories are fitted correctly
and firmly.
• Switch off the product immediately if it
vibrates excessively or does not work
properly, and determine why.
• Sanding dust from some materials,
for example lead paint, some types of
wood, minerals and metals can be
harmful to health and in some cases
toxic. Wear a dust filter mask and
always use dust extraction equipment
when possible.
• Sanding dust from some types of wood,
for example oak and birch, is considered
to be carcinogenic, especially together
Size
44 x 8 x 11.5 cm
Cord length
3 m
Sound pressure level, L
pA
88 dB(A), K=3 dB
Sound power level, L
WA
*
99 dB(A), K=3 dB
Vibration level, a
h,P
8,04 m/s²
* Guaranteed
Always wear ear protection.
The declared values for vibration and noise,
which have been measured according to a
standardised test method, can be used to
compare different tools with each other and for
a preliminary assessment of exposure.
The measurement values have been determined
in accordance with EN 60745-1, EN 60745-2-3.
WARNING!
The actual vibration and noise level when
using tools may differ from the specified
maximum value, depending on how the
tool is used and the material. It is therefore
necessary to determine which safety
precautions are required to protect the user,
based on an estimate of exposure in actual
operating conditions (taking into account all
stages of the work cycle, e.g. the time when
the tool is switched off and when it is idling,
in addition to the start-up time).
DESCRIPTION
INTENDED USE
The product is intended for fine polishing and high
gloss polishing of metal and enamelled surfaces,
together with polish. The product can also be used
to apply wax with a separate wax bonnet.
ACCESSORIES
Accessories for polishing, waxing and cleaning,
including personal protective equipment,
Summary of Contents for 014138
Page 4: ...1 1 1 2 3 4 5 6 7 8 9 10 11 3 8 11 ...
Page 5: ...3 4 4 ...
