EN
33
• The dust from some alloys can catch fire,
or explode. Mixtures of materials increase
the risk – keep the work area clean.
WARNING!
Fire risk. Dust in dust bags, vacuum cleaners
or filters can self-ignite or be ignited by
sparks, hot workpieces or other sources of
heat, especially if it comes into contact with
polyurethane, solvent-based paint and other
chemicals. Make sure that the tool and/or
workpiece do not overheat. Always empty
the dust container before pausing the work.
SYMBOLS
Read the instructions.
Wear safety glasses.
Wear ear protection.
Safety class II.
Approved in accordance with
the relevant directives.
Recycle discarded product
in accordance with local
regulations.
TECHNICAL DATA
Rated voltage
230 V ~ 50 Hz
Nominal input power
1200 W
Speed
600 – 3300 rpm
Disc diameter
Ø 180 mm
Safety class
II
Weight
3.1 kg
more risk of the accessory jamming or
getting stuck, which can cause kickback.
SPECIAL SAFETY INSTRUCTIONS
FOR POLISHING
• Do not allow any part of the polishing
bonnet or its strings to rotate freely.
Tuck in or cut off extruding strings.
Loose strings etc. can fasten in the
workpiece or your fingers – risk of
personal injury.
REDUCTION OF NOISE AND
VIBRATIONS
• Plan the work so that exposure to heavy
vibrations is spread over a longer period.
• To reduce noise and vibrations when in
use, limit the time the tool is in use,
and use low-power/vibration mode and
suitable safety equipment.
• Take the following precautions to
minimise the risks of exposure to
vibrations and/or noise:
– Only use the tool in accordance with
these instructions.
– Check that the tool is in good
condition.
– Use accessories in good condition,
and which are suitable for the
purpose.
– Keep a firm grip on the handles/
grips.
– Maintain and lubricate the tool in
accordance with these instructions.
DUST
• Dust produced during the work can be
harmful to health, carcinogenic,
flammable or explosive. Use a dust filter
mask and suitable equipment for dust
extraction/collection.
Summary of Contents for 014138
Page 4: ...1 1 1 2 3 4 5 6 7 8 9 10 11 3 8 11 ...
Page 5: ...3 4 4 ...
