MEE TSD-ST241W-CN, User Manual

Page: 37 / 46

Functions
13
The display method of the image input by setting
｢
Management
｣
-
｢
Scalling
｣
of the OSD function can be switched.
The image is displayed on a full screen. However, the distortion might generate length and breadth in the
display image as for the expansion rate because it is not constant.
In this setting, the screen of XGA resolution is expanded for instance as
shown in a left chart and it is expanded to a full screen.
Therefore, the distortion occurs in the displayed content when
the expansion rate on length and side is different.
①
Full ; It expands to full-screen.
The image is displayed on a full screen. However, the part where the image is not displayed
in either direction that is upper and lower or right and left might be generated because the expansion ratio is
made constant.
In this setting, for instance, the screen of XGA resolution is expanded to a
full screen in the vertical direction as shown in a left chart. Because the
aspect of former screen is maintained,
the part of no display horizontally remains. However, the distortion doesn't
occur in the displayed content.
Moreover, when the FullHD resolution is input, it becomes the same display
as the case of the above-mentioned setting because it is expanded to a full
screen.
②
Aspect ; It expands with holding the aspect (Factory setting).
The image is displayed by the size like the input resolution.
In this setting, for instance, the screen of XGA resolution is displayed by a
resolution as it is as shown in a left chart.
When the resolution is low, the part of no display remains vertically and
horizontally. However, the distortion doesn't occur in the displayed content.
③
1 : 1 ; It doesn't expand
When the resolution that is lower than FullHD is input, it displays it like the enhancing display or former resolution, etc.
according to the setting adjusted by
｢
Management
｣
-
｢
Scalling
｣
of the OSD menu.
The table below shows the input resolution when
｢
Scalling
｣
setting is
｢
Full
｣
and
｢
Aspect
｣
.
Input resolution
Scaling setting Full Scaling setting Aspect
Remarks
Horizontal
Expansion
magni fi cation
Vertical
Expansion
magni fi cation
Display resolution
when expanding
Horizontal
Expansion
magni fi cation
Vertical
Expansion
magni fi cation
Display resolution
when expanding
640×480 3.00 2.25 1920×1080 2.25 2.25 1440×1080 VGA
720×400 2.67 2.70 1920×1080 2.67 2.67 1920×1068 IBM,VGA
800×600 2.40 1.80 1920×1080 1.80 1.80 1440×1080 SVGA
848×480 2.26 2.25 1920×1080 2.25 2.25 1908×1080 WVGA
1024×768 1.88 1.41 1920×1080 1.41 1.41 1440×1080 XGA
1280×960 1.50 1.13 1920×1080 1.13 1.13 1440×1080 XGA
1280×1024 1.50 1.05 1920×1080 1.05 1.05 1350×1080 SXGA
1600×1200 1.20 0.90 1920×1080 0.90 0.90 1440×1080 USGA
1680×1050 1.14 1.03 1920×1080 1.03 1.03 1728×1080 WSXGA+
1920×1080 1.00 1.00 1920×1080 1.00 1.00 1920×1080 Full HD
Display Size Switch Function