MEE TSD-ST241W-CN, User Manual

Page: 28 / 46

Before Using: Precautions for Safe Use...
4
Observe the following during setup.
Installing this device in poorly ventilated locations and in certain unsuitable places may cause heat to collect inside the
device or lead to fire or electric shock.
Do not install
Do not place in cramped locations.
Prohibited
Do not lay flat, turn on its side,
or turn up side down. Do not expose to direct sunlight or
place next to heating appliances.
Do not install
Do not obstruct air vents with cloth,
etc..
Prohibited
Do not use outside
This device was not designed for use
outside. Using outside may cause
malfunction.
Do not use outside
Do not install in highly humid or dusty
locations or expose to oily smoke or
steam.
Do not install
Do not use in your car
This device cannot be used
in your car or as a mobile
unit. Such use can cause
malfunction.
Prohibited
Do not cause shock to the Touch monitor.
Shock can cause damage
leading to injury or
malfunction.
Prohibited
Do not move while the connector cables are connected.
May cause fire or electric
shock. Check that you have
unplugged the power cable
and disconnected the cables
connecting the device to other
machines before you move it.
Prohibited
Hold the power plug firmly
to unplug it.
Pulling on the cord can cause
tearing, fire and electric shock.
Hold the plug
Do not insert or remove the
power plug with wet hands.
May cause electric shock.
Wet hands
prohibited
Disconnect the plug during servicing.
May cause electric shock.
During servicing, disconnect the
plug from the socket-outlet.
Disconnect plug
Disposing of your Touch monitor.
The fluorescent tubes (backlights) used in the liquid
crystal display contain mercury. Do not dispose of them
on your own.
When disposing of this device, please cooperate with
collection and recycling in accordance with the Law for the
Promotion of Effective Utilization of Resources.
Connect the earth wire
Ground
Failure to connect the earth wire may cause
electric shock during malfunction.
Be sure to disconnect the power plug
from the power outlet before connecting the earth
wire. Also, before disconnecting the earth wire,
be sure to unplug the power plug.
Insert the power plug all the way in.
Insert completely
The plug may cause fire
or electric shock when not
fully inserted.