2 —15
2 —Monitor Setup
Saved Setting Profiles
Alarms and parameter default settings may be independently
modified as part of a customized default profile. Setting changes
generally remain after the monitor is power cycled.
• Changes made to the settings remain in current memory until a
patient is discharged or the monitor is left without power.
• If the monitor loses its current setting it returns to the last profile
selected from the memory. If no profile has ever been selected,
the initial profile is CUSTOM DEFAULTS and begins with the
same settings as the Factory Default Settings listed in “Factory
Defaults” on page 2-38.
• The permanent Factory Default profile can be accessed and
restored in the CONFIG window.
• The user defined profiles can be accessed and restored by
pressing the DEFAULT key.
Making and saving settings profiles is described later in this manual.
Also see “Unit and Configuration Defaults” in Appendix B for
instructions for loading CONFIGURATION defaults (Base System,
Cardiac System or Anesthesia System, depending upon your unit’s
configuration).
