B-1
Appendix B: Unit and
Configuration
Defaults
Restoring the Unit Default
Profile
A set of unit defaults are pre loaded into the non-volatile memory of
the monitor. These defaults can be used as they exist, or can be used
as the basis for creating your own default profile.
The unit default profile can be modified or renamed or replaced if
desired. If you modify the unit defaults it is recommended that you
rename them.
1. Press the DEFAULT button. The Restore Unit Defaults menu
appears. The SELECT option and the currently active profile are
both highlighted.
2. Press the menu knob to scroll through the choices.
3. Turn the knob to ACCEPT.
4. Press the menu knob once. The message Action Completed is
highlighted.
5. Press the menu knob to re-establish the profile. The monitor
returns to the main menu.
Default Settings
Unit Default Settings
Customized defaults can be saved for use at a later time. Starting
from the monitor’s main screen, do the following:
1. Set specific defaults for parameters and alarms. These are set
through the ALARMS, PARAMS, DISPLAY, CONFIG, and
PRINT softkeys.
2. Press and hold the DEFAULT button located on the front panel.
The Set Unit Defaults dialog box appears.
NOTE: If the Set Unit Defaults dialog box that prompts you to
enter a password did not appear, you did not hold the button in
properly. In this case, turn the knob to highlight and select
CANCEL, or you could lose the settings just created.