Medonic M16C-US, User Manual

Page: 68 / 109

67
8.4 Re-location of instrument (within the laboratory)
Description This section describes the procedure performed to move the instrument over
very short distances. (From table to table).
Before the re-
location
If the analyzer is in “standby” mode
do not unplug analyzer. Make sure that the
analyzer is in Sample or List menu before turning off.
Step Action
1
Do not detach the reagent level sensors or waste tubing, place the sensors on top of
the instrument when moving. (Avoid reagent level sensor contact.)
2
Remove the waste tubing from waste container or drain, but do not detach tube from
analyzer.
3 Disconnect all electrical connections.
Re-location Make sure that the instrument is lifted from beneath to avoid unnecessary
stress on the front cover.
After re-location
Step Action
1 Place the waste tubing in waste container or drain.
2 Reconnect the electrical connections.
3 Insert the level sensors back into the reagent containers.
4 Power on unit.
5 Perform Prime.
6 Verify Background.
7
It is recommended that the performance of the Medonic M-series system is checked
with certified blood controls authorized by Boule.
8.5 Short Term Shutdown (<12h)
Description This section describes the procedure when transporting or shutting down the
instrument for a shorter period of time (< 12 hours).
Empty System
Step Action
1 Remove the reagent level sensors from the reagent containers.
2 Press [ADVANCED] button on MENU tab.
3 Press [MAINTENANCE] and then [EMPTY SYSTEM].
4
When empty procedure is complete, the following statement will appear on screen:
‘System is empty and ready for fill or power off.’
5 Switch off power and then unplug analyzer.
Before the re-
location After instrument is powered off, detach reagent level sensors, waste tubing, all
electrical connections, and sample wheels (if applicable). Package all
components carefully for transport.