12
2.2 Installation Checklist and Menu
Description
Follow the quick Installation Checklist and Installation Menu step by step for
best installation results. For more detail on each step refer to Sections 2.3 – 2.6.
Installation Checklist
Complete Unpacking / Operating Placement and Environment instructions in Section 2.1.
Connect the power adapter to the back of the analyzer, but do not plug it into an electrical
socket.
Connect the printer. (If not using Distributor provided printer see Section 4.3.)
Connect the barcode reader to the back of the analyzer.
Connect the waste tubing to the analyzer and plumb to waste container or drain.
Connect the Diluent level sensor (red) and the electronic sensor to the analyzer.
Connect the Lyse reagent level sensor (yellow) and the electronic sensor to the analyzer.
Plug the power cord into the power adapter and the electrical socket to power up the analyzer.
After system initialization follow Installation Menu instructions below.
Installation Menu
The following Installation Menu instructions were created to make installation
as quick and easy as possible. After completing the following five steps (Step 5
is optional) on the Installation Menu, the system will be ready for the first
sample analysis.
Important
The following Installation Menu Steps must be followed in sequential order.
Step
Action
1
Press Step 1 [SET DATE & TIME], set date and time, and press
[EXIT] to return
to Installation Menu.
Figure 2.2 Figure 2.3
Continued on next page
Summary of Contents for M16C-US
Page 1: ...Medonic M series...
