Medisana LT 470, Instruction Manual

Page: 23 / 118

19
3 Operating / 4 Miscellaneous
GB
• The closer you are to the panel, the shorter you will have to use the
device to achieve the desired effect.
• Do not look directly into the light or the light screen for a longer pe-
riod of time.
• During the first applications of the device, you may experience eye
fatigue or headache. This is normal and should soon pass. If the
symptoms persist, lower the intensity and/or the duration of the
application, until you are feeling well again.
• To ensure the product service life, you can use the device up to 2
hours, but do not use the device more than 4 hours in each use. Let
the device cool down for at least 15 minutes before reuse.
Application over longer periods
Repeat the treatment for at least 7 consecutive days during the months
with less sunlight. Depending on your individual requirement, you may
extend this period.
4.1
Cleaning
and
main-
tenance
• Before cleaning the appliance, switch it off, pull the power plug out of
the socket and let the device cool down at least 15 minutes.
• Never touch the device with wet hands.
• Clean the appliance using a soft, lint-free cloth, if necessary damp-
ened with mild, warm soapy water and well wrung out. Do not allow
water to penetrate the appliance.
• Never immerse the device in water or other liquids.
• When cleaning the device, never use aggressive cleaning agents,
scouring agents or solvents; neither should you use scouring pads,
steel wool or tough brushes. This may damage the surfaces.
4.3
Disposal
This product must not be disposed together with the domestic waste.
All users are obliged to hand in all electrical or electronic devices,
regardless of whether or not they contain toxic substances, at a mu-
nicipal or commercial collection point so that they can be disposed of
in an environmentally acceptable manner.
Consult your municipal authority or your dealer for information about
disposal.
4.2
Storage
• If you do not use the device, keep it in a dry place out of reach
of children.
• Let the device cool down at least 15 minutes before storing it.
• If you do not use the device, disconnect it from the mains supply.
• Pay attention to the storage conditions in the chapter
4.6 Techni-
cal specifications.
4 Miscellaneous