EN
13 of 42
Phone:
1300 884 987
Internet: www.medion.com.au
After sales support
4.4. Connect
TV
aerial
To connect to the house antenna or cable system, connect a double-screened cable from the antenna socket to the D-LED
LCD TV.
4.5. DVB-T Mode (Standard Defi nition and High Defi nition)
You will have the possibility of receiving DVB-T by means of a corresponding aerial, if it is offered at your location. An
additional receiver will not be necessary to receive DVB-T channels.
4.6. Connecting a DVB-T aerial
Plug the connector of a DVB-T aerial into the aerial socket of the device.
4.7. Connecting Power Supply
Plug the power cable of the device into a 100 - 240 V - 50 Hz mains socket.
4.8. Switching the D-LED LCD TV on and off
Connect to the power supply with a power cord. The unit will switch to standby off mode when connected to the mains.
To switch on the unit either press the button
on the remote control or the
POWER
button of the unit.
Press the button
on the remote control or the
POWER
button of the unit to switch the device over to standby mode
again. The unit continues to consume power in this mode.
Disconnect the power cord from the mains to switch it off completely.
PLEASE NOTE!
If there is no input signal, the device will automatically switch to standby mode after five minutes. A countdown time
will appear on the screen to show the remaining time. This function is not available for all sources.
