19
Telephone: 1300 884 987
Internet: www.medion.com.au
After Sales Support
If the WPS LED flashes, there has been an error during
connection. Wait two minutes until the LED goes out
and restart the connection process.
After the connection has been completely set up, the
signal LED will indicate the quality of the connection.
To make further settings after the successful
establishment of a WPS connection or to set up the
WPS connection manually after a failed connection
attempt, use the web interface (see page 40).
Manual installation as repeater via the web
interface
WiFi Range Extender basic settings in repeater
mode
• Before the WiFi Range Extender is configured via the
web interface, DHCP for wireless and LAN is activated.
• The SSID is set to “repeater” and no encryption is set.
• After the WiFi Range Extender has been set up via the
Quick Setup menu and connected to the home router,
the WiFi Range Extender restarts.
• Following the restart, DHCP is deactivated on the
WiFi Range Extender. The WiFi Range Extender now
receives the IP addresses from the router and passes
these on to any devices that are connected to the WiFi
Range Extender.
86738 EN ALDI AUS Content RC2.indd 19
86738 EN ALDI AUS Content RC2.indd 19
29.08.2012 09:09:27
29.08.2012 09:09:27
