234 of 344
Safety Instructions
mains, if required.
• To avoid overheating, do not cover the mains adapter.
• If you use an extension cable, make sure that it complies with
Australian requirements. If in doubt, contact an electrician.
• Position the cables so that no one can step on or trip over
them.
• Do not place any objects on the cables, as this could damage
them.
2.8. Note on electrostatic charge
If the device does not function properly due to electrostatic
charge, reset it by temporarily disconnecting it from the main
power.
2.9. Notes on conformity
Your device fulfils the requirements for electromagnetic com-
patibility and electrical safety.
Medion AG hereby declares that this device conforms to the
fundamental requirements and the remaining relevant regula-
tions of the directives 2006/95/EG and 2011/65/EU.
This product satisfies the basic requirements and relevant regu-
lations of the Ecodesign Directive 2009/125/EC (Act 1275/2008).
However, due to the function of this device (permanent provi-
sion of data in the network), the use will not be minimized as
per the Ecodesign Directive.
To minimize energy consumption, use the On/Off switch to turn
off the device, or disconnect it from the mains if you will not be
using it.
Full declarations of conformity are available at http://www.me-
dion.com/conformity.
86909_50044859 DE-EN-FR EComm Content RC1.indb 234
86909_50044859 DE-EN-FR EComm Content RC1.indb 234
02.04.2013 13:53:26
02.04.2013 13:53:26
Summary of Contents for LIFE P89638
