19
EN
DE
FR
IT
NL
DK
NO
SE
Setting the time
The time is automatically set when using RDS reception and does not need
to be set manually. A manually set time will be reset when using RDS
reception. However, the 12/24 hour setting will remain unchanged.
To display the time during operation, press the
IPOD/MEM/C.-ADJ.
button
for approx. 2 seconds.
How to set the time manually:
Switch the device to standby mode.
Press the
IPOD/MEM/C-ADJ.
button on the device. Use the
or
buttons to choose between 24 and 12 hour display (
24 HOUR
or
12 HOUR
).
If you select 12 hour display, “
AM
” or “
PM
”
will appear before the hour display:
AM
: the hours from 00:00 to 11:59;
PM
: the hours from 12:00 to 23:59.
Press the
IPOD/MEM/C.-ADJ.
button again.
The hour display flashes. Press the
or
buttons within 6 seconds
to enter
the hour.
Press the button
IPOD/MEM/C-ADJ.
The minute display will flash.
Press the
or
buttons within 6 seconds to enter the minutes.
Press the
IPOD/MEM/C.-ADJ.
button again.
The time is now set and
the figures will have stopped flashing.
