1
11
1.. V
VG
GA
A
A
AN
ND
D
H
HD
DM
MII P
PC
C
M
MO
OD
DE
E
29
English
D
eut
sch
Fr
anç
ai
s
It
aliano
Español
Nederlands
Portug
uês
Dan
sk
AUTO:
Your TV device will recognize the type of signal at the VGA or HDMI socket automatically.
PC:
In this setting, your TV device will expect an input signal at the VGA or the HDMI
socket from the video display adapter of your PC. Please pay attention to the correct
selection and setting of your video display adapter.
VIDEO:
In this setting, your TV device will expect an input signal at the VGA or the HDMI
socket from a source of video. Please pay attention to the correct selection and set-
ting of the output of your source of video.
Note:
The TV device is equipped with an automatic, complex recognition of the type of
signal and the source of the signal. However, incorrect identifications can arise because
of different tolerances of the source of your signal. Use the manual settings for the input
in this case.
4. Horizontal position:
You can change the horizontal position of the image from the VGA or the HDMI socket
with the
WX
VOL+/VOL-
Buttons.
5. Width:
You can change the width of the image from the VGA or the HDMI socket with the
WX
VOL+/VOL-
Buttons.
6. Vertical position:
You can change the vertical position of the image from the VGA or the HDMI socket with
the
WX
VOL+/VOL-
Buttons.
7. Phase:
You can optimize the presentation of text on the TV device (e.g. in the case of quivering
letters) and compensate for possible disruptions to the image (disruption in the picture
or wave lines) with the
WX
VOL+/VOL-
Buttons.
8. Frequency:
Possible disruptions to the image (disruption in the picture or wave lines) can be com-
pensated for with the
WX
VOL+/VOL-
Buttons. This setting should only be changed in
the case of problems.
9. Audio input (only active in the PC HDMI mode, not in the PC VGA mode):
It is possible to choose between the DIGITAL/ANALOG settings with the
WX
VOL+/VOL-
Buttons or through a list of choices, which can be reached by pressing the
MENU
Button.
DIGITAL:
Your TV device will reproduce the digital sound present in the HDMI signal.
ANALOG:
The sound signal from the analogue Audio In socket will be reproduced.
Note:
The digital HDMI signal usually consists of image and sound. However, it can
definitely occur that your PC or your source of video does not transmit the sound infor-
mation by means of an HDMI signal or DVI signals are reproduced through a so-called
DVI-HDMI adapter. In this case, you will have to make the audio signal available
through the analogue HDMI Audio In socket of your TV device and switch the audio input
to the ANALOG setting.
10. You leave the Menu with the
EXIT
Button.
Note:
The device is provided with standardized pre-settings for the above setting values.
Nevertheless, manual adjustment of the settings values may be necessary, to achieve un-
disrupted reproduction and complete reproduction, because of deviating signals of your
video adapter or your video source!
Summary of Contents for FLAT PANEL TV
Page 84: ...D DE EU UT TS SC CH H 38 ...
Page 126: ...D DA AN NS SK K 38 ...
