Operating Manual OXI-dive
TM
1
Page 8 of 19
Self-Sealing Valves
Three self-sealing oxygen valves are activated automatically by screwing the white oxygen
handwheels into place.
1.
Oxygen (400 kPa) from a wall outlet or a regulator fitted to a large cylinder, can
be introduced into the KDK85 Autovalve through the self-sealing valve by the
colour coded white hose line with diameter indexed oxygen handwheels at each end
(supplied). The oxygen cylinder in the OXI-dive
TM
1 must be turned off.
2.
The nipple restrictor handwheel (marked with an ‘8’) when attached to a self
sealing valve provides 8 L/min of oxygen for use with an extra casualty, if required.
The therapy tubing is connected to the non-rebreathing therapy mask or the CPR-
PRO Resuscitation Mask.
3. Alternatively the self sealed outlet can be used for attachment of the optional
MTV-100/Manually Triggered Ventilator.
Pelican Case
The Pelican Case is designed to be completely airtight and waterproof if it is closed
properly and the dial is tightened
#
. If completely closed, no damage should occur to the
enclosed equipment if the case becomes submerged in water. However, individual
components may be damaged if submerged while not protected by the case. In this
event, the exposed parts should be sent to an approved service centre for inspection,
cleaning and servicing if required.
#
NOTE:
To reopen the case, loosen the dial.
