Medical Developments International OXI-dive 1 Operating Manual Download | Manualshive

Page: 5 / 19

background image

Operating Manual OXI-dive

TM

1

Page 5 of 19

2 Components of the OXI-dive

™1

Pelican case #1520, optional #1600 for full size C cylinders
KDK85 Autovalve™: combined regulator and flowmeter (range 0.5-8 L/min)

with an ‘Oxygen Flush’ at all settings. Incorporates three self-sealing valves

    8 L/min oxygen flow restrictor and handwheel assembly
    2 m white oxygen tubing fitted with an oxygen handwheel at each end
    KAB™ carbon dioxide absorber. Disposable single patient use pre-filled with

CO

2

absorber

Universal twin hose, single patient use breathing circuit c/w 2 L latex-free
breathing bag and size 5 mask

CPR-PRO™ resuscitation mask with oxygen inlet and 1-way valve. Single
patient use

Non-rebreathing therapy mask with safety vent, reservoir bag and oxygen
tubing. Single patient use

MTV-100 manually triggered ventilator c/w 1.2 m white self-store oxygen hose
and a diameter indexed oxygen handwheel (optional)

    Handicant decanting tool (optional)
    KDK™ regulator to fit to a large supply cylinder (optional)
    Operating manual
    Size 3 disposable mask (optional)
    OXI-Vac, Venturi suction device (optional)
    Guedel airways, set of 4

Does not include oxygen cylinder.

«
...
3
4
5
6
7
...
»

Summary of Contents for OXI-dive 1




















Reviews:

No comments

Related manuals for OXI-dive 1

Brand: DAKOTA ULTRASONICS Pages: 25

Brand: DAKOTA ULTRASONICS Pages: 36

Brand: Gardner Bender Pages: 7

Brand: Vega Pages: 28

Brand: Vega Pages: 20

Brand: THORLABS Pages: 21

Brand: Oldham Pages: 96

Brand: Kipp & Zonen Pages: 32

Brand: Bitzer Pages: 8

Brand: Omega Pages: 4

Brand: Racelogic Pages: 15

Brand: Heyuan Intelligence Pages: 14

Photo Set Strato S-20

Brand: Fisso Pages: 2

Brand: Radiation Alert Pages: 22

Brand: dacell Pages: 21

Brand: SED Pages: 52

Brand: Southland Pages: 36

Brand: Dwyer Instruments Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands