Operating Manual OXI-dive
TM
1
Page 13 of 19
6 Cleaning and Decontamination
Single Patient Use Items
Discard single patient use items into a sealed container suitable for the collection of
medical disposable items.
KDK™85 Autovalve
The body of the KDK85 Autovalve may be wiped clean with soap and water or
alcohol. The unit must not be immersed in liquid.
Pelican case
Most scuffs and stains can be removed with a non-abrasive household cleaner and a
sponge. Do not use any type of brush that will scratch the surface.
7 Storage and Servicing
Ensure the cylinder is full and turned OFF. Check the
KDK85 Autovalve
is
depressurised; the gauge reading must be zero.
Store the OXI-dive
TM
1 equipment in a clean, dry and well-ventilated area, away
from sources of heat and combustible materials.
Never allow oil, grease or
flammable substances to come into contact with the equipment.
Regularly check the contents of the cylinder and functioning of the equipment to
ensure proper performance. The frequency of testing should be established
according to usage, but at least every two (2) months.
An appropriately trained technician should inspect the OXI-dive
TM
1 oxygen
resuscitation unit at yearly intervals.
The KDK85 Autovalve should be serviced every three (3) years or more often if
frequently in use. Contact Medical Developments International Limited.
Ensure the cylinder is currently within the 10 year test period. The date is
stamped on the neck of the cylinder. The oxygen cylinder must only be refilled at
authorised filling stations. Cylinders must be visually examined regularly for signs of
damage and hydrostatically tested at least every 10 years.
Two spare sealing washers (‘Bodok’ seals) should be kept with the equipment.
Since the Pelican case is airtight, moisture can sometimes be trapped inside and
therefore it is recommended that silica-gel moisture absorbing packets are used to
remove moisture if stored for long periods. Check the ‘O’-ring grooves in the base
and lid of the Pelican case for debris. Ensure the large ‘O’-ring within the lid is free
of cuts, abrasions and debris.
8
Dimensions
Case Number #1520
Case Number #1600
W 490 mm
W 616 mm
H 385 mm D 195 mm
H 493 mm D 220 mm
