Medialon Showmaster Go, Hardware Manual

Page: 63 / 80

Showmaster Maintenance
Medialon Control System p 61 of 80
User Reference Manual
M515-2 | 2020-May
Example :
set conf gateway 192.168.1.254
• pridns: primary DNS address
Example :
set conf pridns 192.168.1.1
set conf pridns ns0.dnsserv.net
• secdns: secondary DNS address
Example :
set conf secdns 192.168.1.2
set conf secdns ns1.dnsserv.net
• dhcp: enable <‘on’> or disable <‘off’> automatic IP addressing of Showmaster
Example :
set conf dhcp on
• log: enable <‘on’> or disable <‘off’> Showmaster log traces
Example :
set conf log on
• logbufsize: defines the buffer size (expressed in messages) for Showmaster’s log traces
Example :
set conf logbufsize 10000
•
logtracecues: enable <‘on’> or disable <‘off’> log traces of the cues executed in tasks
Example :
set conf logtracecues on
• logmxmtrace: enable <‘on’> or disable <‘off’> log traces of MxMs
Example :
set conf logmxmtrace off
• logmxmcmdtrace: enable <‘on’> or disable <‘off’> log traces of commands executed by the
MxMs
Example :
set conf logmxmcmdtrace off
‘logmxmtrace’ must be set to ‘on’ before MxM commands can be traced.
• logrt: enable <‘on’> or disable <‘off’> log traces of Showmaster’s run-time information like
memory usage, handles, etc.
Example :
set conf logrt off
• logrtperiod: defines the time period (expressed in milliseconds) between Showmaster’s run-
time log traces
Example :
set conf logrtperiod 3000
•
loghistsize: defines the size (expressed in days) of log trace history
Example :
[msmrt] > set conf loghistsize 10
[msmrt] Log History Size set to ‘10’ (call ‘commit’ to apply)