Showmaster Overview
Medialon Control System
p 41 of 80
User Reference Manual
M515-2 | 2020-May
vibration. For environments with some movement and vibration, an anti-shock frame mount is
available for single units.
Only used at altitude
not
exceeding 2000
m
Only used in not-tropical
climate regions
Thermal
Do not block any of the unit’s air vents and ensure the ambient temperature around the unit is
compatible with the environmental characteristics stated on the back page of this manual.
Particularly when mounted in a rack cabinet with front or rear doors the ambient temperature
around the unit may be higher than the ambient room temperature.
Showmaster Go can be mounted vertically using the optional VESA mounting plate, but
care must be taken that hot air from the rear panel is not drawn back in at the front. Do
not mount with the front panel uppermost.
Electrical
Before connecting mains power to the unit’s power supply unit (PSU), ensure the electricity
supply is compatible with the electrical ratings shown here and on the power supply product
label.
The power supply unit is connected to, and disconnected from, the mains
supply with an IEC 60320 power connector.
2.5.8
Maintenance
Air Filter
It is important to remove and clean or replace the filter periodically to avoid overheating.
Showmaster Go units are supplied with one spare filter pad, others can be provided by your
supplier. Showmaster Go should not be run without filters, since accumulations of dust inside the
unit can affect performance.
Cleaning
External casing and the front panel should be carefully wiped with a soft cloth and antistatic
solution.
Summary of Contents for Showmaster Go
Page 1: ...Medialon Showmaster Hardware Manual User Reference...
Page 79: ......
