Showmaster Maintenance
Medialon Control System
p 53 of 80
User Reference Manual
M515-2 | 2020-May
Firmware Info
If needed or requested by Medialon Support, you can save the list of firmware components.
•
Save
: save the content list of both firmware (Editor and Showmaster) in an XML file.
•
Copy
: copies to the clipboard the list of components for both firmware. This list can be
pasted into an email or a text editor.
3.1.5
Reset Showmaster Firmware
It is always possible to reset the Showmaster’s firmware to the default factory installation.
Use the ‘Factory’ command of the Showmaster V2 Recovery Tool as described in the following
steps:
1.
Start your Medialon Showmaster in Recovery Mode. Hold press Up key during startup
process
2.
Start Medialon Recovery Tools
3.
Type ‘scan’ to detect your Showmaster on the network
4.
Type ‘connect’ to open the connection with your Showmaster
5.
Type ‘factory’ to initiate the Reset Factory Firmware
6.
Type ‘commit’ to validate and start the reset of Factory Firmware
7.
Your Showmaster will reboot at the end of the process
Summary of Contents for Showmaster Go
Page 1: ...Medialon Showmaster Hardware Manual User Reference...
Page 79: ......
