MEDENUS RSP 254, Operating And Maintenance Instructions Manual

Page: 4 / 52

Table of Contents
1 General Information 6
1.1 Warranty and Liability 6
1.2 Symbols, Notes 7
1.3 Terms, Abbreviations 7
2 Application, Characteristics 8
2.1 Application 8
2.2 Characteristics 8
2.3 Types of Models (Options) 8
3 Reasonably Foreseeable Misuse 8
4 Safety Instructions 9
4.1 Hazards of Handling the Device 9
4.2 Personnel Requirements 9
4.3 Country-Specific Requirements 9
4.4 Handover of the Operating and Maintenance Instructions 9
4.5 Safety in Operation 10
4.6 What to Do in Case of Danger 10
5 Responsibility of the Operator 10
6 Transport, Storage and Packaging 11
6.1 Transport 11
6.2 Storage 11
6.3 Packaging 11
7 Mounting and Commissioning 12
7.1 Safety Instructions and Preparation 12
7.2 Mounting 13
7.3 Leakage Test (Test for External Leakage) 14
7.4 Initial Commissioning / Recommissioning 15
7.5 SSV Setpoint Spring Table - Control Device 17
7.6 Regulator Setpoint Spring Table 18
7.7 Decommissioning 19
8 Maintenance 19
8.1 Maintenance Plan 19
8.2 Maintenance Procedure 20
8.3 Table of Screw Tightening Torques M
A
21
8.4 Lubricants Table 21
9 Troubleshooting 22
9.1 Gas Pressure Regulator 22
9.2 Safety Shut-Off Valve 23
10 Replacement and Disposal 24
11 Spare Parts 25
11.1 Spare Parts Drawing Example: AS 254 DN080 25
11.2 Spare Parts Drawing Fine Filter FF 26
11.3 Spare Parts Drawing R-70-10/ R70-20/ R70-100 26
11.4 Parts for Maintenance Work Actuator 28
11.5 Parts for Maintenance Work Regulator 30
11.6 Parts for Maintenance Work Fine Filter FF 30