medemagroup Mini Crosser X-Joy Service Manual Download Page 6

Page: 6 / 84

Service manual 1533-2007-S

6 of 84

Version 1.0.3 - 2020

Medema Production A/S

Intended occupant

The intended occupant of the wheelchair is a person with lim

ited ability of walking themselves.

The wheelchair is equipped with a joystick control which makes

it usable for an occupant who only has low functionality in the

fingers. It can be driven with only one hand either left or right.

The occupant must be able to see in order to register traffic sig

nals and other road users when driving in traffic. The occupant

can be deaf and/or speechless.

The occupant must have a cognitive ability to understand the

operation of the joystick and its buttons and icons.

The maximum occupant weight is 150 kg.

Help for the visually impaired

If you have difficulty reading small print in the user manual, we

recommend that you visit our website, where you can read this

manual in PDF format. You can enlarge the PDF manual on

your PC monitor to suit your needs and preferences.

If you find it difficult to understand the manual and have general

questions about the product, please feel free to contact us. You

can find our contact info on page two in this user manual.

You can find manuals for all our products on our web page

www.medema.dk. Or contact Medema A/S, and we can send

the manuals in a mail for you. Find the contact information on

page two in this manual.

FSN (Field Safety Notice)

All information concerning safety can be found at www.mede

ma.com, which is always updated with the latest safety informa

tion. In the event of important safety-related changes, we will

notify our customers directly (FSN).

Summary of Contents for Mini Crosser X-Joy





















































































Search results

Summary of Contents for Mini Crosser X-Joy

Reviews:

Brands by name

Popular brands

medemagroup Mini Crosser X-Joy, Service Manual

Search results

Summary of Contents for Mini Crosser X-Joy

Reviews:

Brands by name

Popular brands