manualshive.com logo in svg

medemagroup Mini Crosser X-Joy, Service Manual

Share
Download
medemagroup Mini Crosser X-Joy Service Manual Download Page 27

Service manual 1533-2007-S

 27 of 84

Version 1.0.3 - 2020

Medema Production A/S

Electromagnetic compatibility

If the Mini Crosser starts making involuntary movements or if 

the brakes are released, turn the Mini Crosser off as soon as it 

is safe to do so. In certain circumstances a Mini Crosser can set 

off shop alarms.

The Mini Crosser satisfies the requirements for the use of Mini 

Crossers in an environment with electromagnetic noise. There 

may, however, be rare situations in which electromagnetic noise 

can affect the Mini Crosser. Sources of such noise include radio 

and television stations and amateur radio transmitters.

When driving in traffic

Be particularly aware of the following when driving in traffic:

• 

The Mini Crosser is a low vehicle and not always easy for other 

road users to see. Make quite sure that other road users have 

seen you before driving onto the highway.

 

• 

Keep an eye on traffic behind you. Keep well over to the side of 

the road when driving on busy roads.

 

• 

Turning right and left at crossroads. Be aware of cyclists and pe

-

destrians. Follow the rules of the road for cyclists.

 

• 

How quickly things are happening. How long do the lights stay 

green? How quickly are cars approaching? etc.

Summary of Contents for Mini Crosser X-Joy





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands