manualshive.com logo in svg

medemagroup Mini Crosser X-Joy, Service Manual

Share
Download
medemagroup Mini Crosser X-Joy Service Manual Download Page 38

Service manual 1533-2007-S

 38 of 84

Version 1.0.3 - 2020

Medema Production A/S

LED 

When experiencing an electronic fault a number of LED in the 

battery indicator will light up. Below you can see the possible 

cause, and suggested action that you can try before calling the 

authorised service agent.

LED

Possible cause

1 LED

The batteries needs charging. Or there is a bad connection to one of 

the batteries. Check battery connections. If they are ok, try charging 

the batteries.

2 LED

Bad connection to the left motor. Check the connection. If it seems to 

be ok, contact authorised service technician. 

3 LED

There is short circuit between the left motor and battery. Contact 

authorised service technician.

4 LED

Bad connection to the right motor. Check the connection. If it seems 

to be ok, contact authorised service technician. 

5 LED

There is short circuit between the right motor and battery. Contact 

authorised service technician.

6 LED

The vehicle is inhibited from driving by an external signal. The cause 

is depending on the type of the vehicle. Contact authorised service 

technician.

7 LED

Joystick fault. Check that the joystick is centred and not moved during 

start up. Turn of the vehicle and then turn it on again. 

8 LED

A possible system error is indicated. Check connections. Contact 

authorised service technician.

9 LED

There is a bad connection to the parking brake. Check the connection 

between motor and parking brake. 

10 LED

Excessive voltage has been sent to the system. This is often due to a 

poor connection to the batteries. Check battery connections.

7 LED+ S

A communication error is indicated. Make sure that the joystick cable 

is properly connected and in no way damaged.

Summary of Contents for Mini Crosser X-Joy





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands