medemagroup Mini Crosser X-Joy Service Manual Download Page 11

Page: 11 / 84

Service manual 1533-2007-S

11 of 84

Version 1.0.3 - 2020

Medema Production A/S

Declaration of conformity

Medema Production A/S hereby declares that:

Machine:

Electric mobility wheelchair

Use:

Transport of walking-disabled people

Model No:

Mini Crosser X-Joy

Complies with the Medical Device Directive 93/42/EEC

The product is accredited according to standard DS/EN 12184

- Electrically powered wheelchairs, scooters and their chargers -

Requirements and test methods.

The product is risk analysed in accordance with the harmonized

standard DS/EN ISO 14971:2012 Medical devices - Application

of risk management to medical devices.

The Mini Crosser can, for a fee, be taken to the nearest dealer

for disposal in accordance with current environmental regula

tions.

Manufacturer:

Medema A/S

Address:

Enggårdvej 7, DK-7400 Herning

Tel.

+45 7010 1755

Date: 31.01.2018

Signature: _____________________

Managing director Finn Dose

Summary of Contents for Mini Crosser X-Joy





















































































Search results

Summary of Contents for Mini Crosser X-Joy

Reviews:

Brands by name

Popular brands

medemagroup Mini Crosser X-Joy, Service Manual

Search results

Summary of Contents for Mini Crosser X-Joy

Reviews:

Brands by name

Popular brands