medemagroup Mini Crosser X-Joy Service Manual Download Page 44

Page: 44 / 84

Service manual 1533-2007-S

44 of 84

Version 1.0.3 - 2020

Medema Production A/S

Push the disengagement lever down to

disengage (only hand brake works) and

push up to reactivate the motor (normal

driving now possible).

Disengagement

Manual

The manual disengagement lever is placed underneath the bat-

tery cover. Before disengagement - do the following:

• Turn off the vehicle.

•

Push the disengagement lever at the back down.

The motor brake is now disengaged and the vehicle can be

pushed or towed, but not driven.

Electronic disengagement

The yellow disengagement button is placed on the back of the

vehicle. It works only when the vehicle is turned on.

NOTE!

The motor brake must never be disengaged on sloping terrain.

If the brake is somehow disengaged on a slope/hill, the Mini

Crosser will brake automatically when it reaches a certain

speed. There is an electric safety feature in the control system,

which works even if the battery is disconnected. This is also the

reason why the Mini Crosser cannot be towed at more than 5

km/h. See the section about towing.

Once the motor brake has been disengaged, the Mini

Crosser can only be stopped with the hand brake.

Disengagement lever

Summary of Contents for Mini Crosser X-Joy





















































































Search results

Summary of Contents for Mini Crosser X-Joy

Reviews:

Brands by name

Popular brands

medemagroup Mini Crosser X-Joy, Service Manual

Search results

Summary of Contents for Mini Crosser X-Joy

Reviews:

Brands by name

Popular brands