medemagroup Mini Crosser X-Joy Service Manual Download Page 40

Page: 40 / 84

Service manual 1533-2007-S

40 of 84

Version 1.0.3 - 2020

Medema Production A/S

Charging

Plug the cable into the control box on the wheelchair.

Plug the charger into the outlet or switch it on.

Use the indicator lights on the charger to check that charging has started.

When charging has finished, switch off or unplug the charger, and then

remove the charger cable from the control box.

The battery manufacturer recommends charging the batteries at

temperatures b10° and +30°C in order to achieve the

charging times specified in “Technical data”.

Charging takes around 60% longer at +5°C than at +20°C. This

is because the battery finds it more difficult chemically to absorb

the current.

It is advisable to charge the Mini Crosser in a heated room. If

this is not possible every day, it should at least be done once a

week.

Please note that the capacity of the batteries will reduce over

time and at low temperatures. Battery capacity at -10°C is half

that at +20°C.

New batteries do not reach full capacity until they have been

charged and discharged about 20 times.

If the Mini Crosser is not going to be used for an extended

period, charging once a month will suffice. The batteries must

ALWAYS be fully charged when put into storage, as they cannot

tolerate being left in a discharged state for lengthy periods.

Note!

The charger must NOT be placed on the seat during charging.

The Mini Crosser should be charged while not in use. The

charger supplied from the factory is of the automatic type and

Summary of Contents for Mini Crosser X-Joy





















































































Search results

Summary of Contents for Mini Crosser X-Joy

Reviews:

Brands by name

Popular brands

medemagroup Mini Crosser X-Joy, Service Manual

Search results

Summary of Contents for Mini Crosser X-Joy

Reviews:

Brands by name

Popular brands