22
Troubleshooting
Problem
No sound
No sound from Pads
No click sound
The Pad volume doesn’t match the
Song playback volume.
Cannot connect to the computer
Possible Cause and Solution
Rotate the [VOLUME] knob to set an appropriate volume level.
1. Make sure the pads are connected correctly.
2. Make sure the pad volume is not set to “0”.
1. Make sure the click is turned on.
2. Make sure the click volume is not set to “0”.
Adjust the song playback volume to match the pad volume.
1. Make sure the USB has correctly connected.
2. Do the connect operation again (Keep the computer on, and
then turn the module on, connect the USB cable).
Prompt Messages
Message
REC FUL
FAC SEt
EMP
OK
WAT
Meaning
The record data memory is full.
The factory reset of module is completed.
The user song is empty.
The drum kit and utility settings are saved.
The data is loading from flash ROM now, please wait.
Summary of Contents for MZ528
Page 1: ......
Page 31: ...31 MIDI Implementation Chart O YES x NO 0 127...
Page 32: ...MZ528 _OM04EN...
