56 / 65
Page
Mechatro, INC
.
USER MANUAL
V1.2
MTP-2100
Second byte (printer information)
Bit
Off/On Hex Decimal
Status for ASB
0
Off
00
0
Not used. Fixed to Off.
1-2 - - - Undefined.
Off
00
0
No cutter error.
3
On 08 8 Cutter
error.
4
Off
00
0
Not used. Fixed to On.
Off
00
0
No TPH header error.
5
On 20 32 TPH
header
error.(Overheat)
Off
00
0
No Thermistor error.
6
On 40 64 Thermistor
error.
7
Off
00
0
Not used. Fixed to Off.
Bit 3:
If these errors occur due to paper jams or the like, it is possible to recover by
correcting the cause of the error and executing
DLE ENQ 1
. If an error due to a
circuit failure (e.g. wire break) occurs, it is impossible to recover.
Bit 5:
If the print head temperature becomes high, bit 6 is transmitted until the print
head temperature drops sufficiently. The printer automatically recovers from this
error.
Third byte (paper sensor information)
Bit
Off/On Hex Decimal
Status for ASB
0
Off
00
0
Not used. Fixed to Off.
Off
00
0
Paper near end sensor. Paper adequate.
1
On
02
2
Paper near end is detected by the paper near end sensor.
2 - - - Undefined.
Off
00
0
Paper end sensor. Paper adequate.
3
On
08
8
Paper end is detected by the paper end sensor.
4-7
Off
00
0
Not used. Fixed to Off.
Fourth byte (paper sensor information)
Bit
Off/On Hex Decimal
Status for ASB
0
Off
00
0
Not used. Fixed to Off.
1-3 - - - Undefined.
4
On
02
2
Not used. Fixed to Off.
5-6 - - - Undefined.
7
Off
00
0
Not used. Fixed to Off
[Reference]
DLE
EOT
