Mechatro MTP-2100, User Manual

Page: 40 / 65

40 / 65
Page
Mechatro, INC
.
USER MANUAL V1.2 MTP-2100
DLE EOT
n
[Name] Real-time status transmission
[Format] ASCII DLE EOT
n
Hex 10 04
n
Decimal 16 4
n
[Range] 1 ≤
n
≤ 4
[Description] Transmits the selected printer status specified by n in real time,
according to the following parameters:
n
= 1: Transmit printer status
n
= 2: Transmit off-line status
n
= 3: Transmit error status
n
= 4: Transmit paper roll sensor status
n
= 1: Printer status
Bit Off/On Hex Decimal Function
0 Off 00 0 Not used. Fixed to Off.
1 - - - Undefined.
2 - - - Undefined.
Off 00 0 On-Line. 3
On 08 8 Off-Line.
4 On 10 16 Not used. Fixed to On.
5 - - - Undefined.
6 - - - Undefined.
7 Off 00 0 Not used. Fixed to Off.
n
= 2: Off-line status
Bit Off/On Hex Decimal Function
0 Off 00 0 Not used. Fixed to Off.
1 - - - Undefined.
Off 00 0 TPH is closed. 2
On 04 4 TPH is open.
Off 00 0 Paper is not being fed by using the Self button. 3
On 08 8 Paper is being fed by using the Self button.
4 On 10 16 Not used. Fixed to On.
Off 00 0 No paper-end stop. 5
On 20 32 Printing stop due to paper-end.
Off 00 0 No error. 6
On 40 64 Error occur.
7 Off 00 0 Not used. Fixed Off.
Bit 5: On (printing stops due to paper end) when printing stops due to paper-end
detected by the paper-end sensor or the paper near end enabled by using the
ESC c 4
.