46 / 65
Page
Mechatro, INC
.
USER MANUAL
V1.2
MTP-2100
ESC J
n
[Name]
Print and feed paper
[Format]
ASCII
ESC
J
n
Hex
1B
4ª
n
Decimal
27
74
n
[Range]
0
≤
n
≤
255
[Description]
Prints the data in the print buffer and feeds the paper [
n
× vertical motion
unit]
inches.
[Notes]
• After printing is completed, this command sets the print starting
position to the beginning of the line.
• The paper feed amount set by this command dose not affect the values
set by
ESC
2
or
ESC
3
.
• The vertical motion unit are specified by
GS
P
.
• The GS P command can change the vertical motion unit.
• The maximum line spacing is 1016mm. When the setting value exceeds
the maximum, it is converted to the maximum automatically.
[Reference]
GS
P
ESC K
n
[Name]
Print and reverse feed
[Format]
ASCII
ESC
K
n
Hex
1B
4B
n
Decimal
27
75
n
[Range]
0
≤
n
≤
255
[Description]
Prints the data in the print buffer and reverse feeds the paper [
n
×
vertical motion unit] inches
[Notes]
• Reverse direction paper feeding causes the following problems
1) Paper feed pitch is incorrect.
2) Printer noise is louder than normal.
• The maximum reverse line spacing is 29mm (1.14 inches). When the
setting value exceeds the maximum, it is converted to the maximum
automatically.
[Reference]
ESC
J
