41 / 65
Page
Mechatro, INC
.
USER MANUAL
V1.2
MTP-2100
n
= 3: Error status
Bit Off/On Hex Decimal
Function
0
Off
00
0
Not used. Fixed to Off.
1 - - - Undefined.
2 - - - Undefined.
Off
00
0
No cutter error.
3
On 08
8 Cutter
error.
4
On
10
16
Not used. Fixed to On.
Off
00
0
No TPH header error.
5
On 20
32 TPH
header
error.
Off
00
0
No Thermistor error.
6
On 40
64 Thermistor
error.
7
Off
00
0
Not used. Fixed Off.
Bit 3:
If these errors occur due to paper jams or the like, it is possible to recover by
correcting the cause of the error and executing
DLE ENQ 1
. If an error due to a
circuit failure (e.g. wire break) occurs, it is impossible to recover.
Bit 5:
If the print head temperature becomes high, bit 6 is transmitted until the print
head temperature drops sufficiently. The printer automatically recovers from this
error.
n
= 4: Continuous paper sensor status
Bit Off/On Hex Decimal
Function
0
Off
00
0
Not used. Fixed to Off.
1 - - - Undefined.
Off
00
0
Paper near end sensor. Paper adequate.
2
On
04
4
Paper near end is detected by the paper near end sensor.
3 - - - Undefined.
4
On
10
16
Not used. Fixed to On.
Off
00
0
Paper end sensor. Paper adequate.
5
On
20
32
Paper end is detected by the paper end sensor.
6 - - - Undefined.
7
Off
00
0
Not used. Fixed Off.
Bits 2:
The "paper near end" detector is an option.
[Reference]
DLE
ENQ
,
GS
a
