manualshive.com logo in svg

Mec Titan Boom 60-S, Operator'S Manual

Share
Download
Mec Titan Boom 60-S Operator'S Manual Download Page 15

Page 11

Ttan Boom

TM

 60-S - Operator’s Manual

September 2020

Platform Controls

ART_4301

1

2

3

4

5

6

8

10

11

12

13

14

9

16

15

17

18

19

20

ALWAYS be aware of the machine’s position and of your surroundings 
before activating any control function�����

Control

Description

1

Function Enable 
Button

Press and hold this button to enable boom, platform, frame level and outrigger 
operations.

2

Auxiliary Power

If normal power fails, press and hold while using boom retract and boom lower 
functions.

3

Start/Stop Switch

Move this switch up to start engine. Press this switch down to stop engine.

4

Glow Plug Light

The light will turn on when the Kubota ECU determines it necessary to activate glow 
plugs before starting the engine.

5

Emergency Stop 
Switch

Press the EMERGENCY STOP switch at any time to stop all machine functions.
Turn switch clockwise to reset.

6

Generator Switch
(Optional Equipment)

Turn switch ON to engage optional AC generator.
Generator switches off in any other function is enabled.

7

--

--

8

Outrigger Switch

Move and hold this switch down until outrigger deployment stops automatically.
Move and hold this switch up to retract outriggers.

9

Outriggers Set 
Indicator Light

Green light illuminates when the outriggers are fully deployed and the full range of 
boom functions are enabled.

10

Frame Level Switch

Move this switch left or right to manually adjust the level position of the frame.

11

Speed/Torque Switch

Move this switch to the left for high speed drive. Push this switch to the right for high 
torque drive.

12

Horn Button

Press to sound warning horn.

Platform Controls

Secton 5 - Controls & Components

Summary of Contents for Titan Boom 60-S

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands