45
Support Services :
Trainin
g/ Servicin
g/ Repairs
Training
This Instruction Manual is comprehensive but cannot fully
replace expert tuition. Excellent training is available directly from
C.Scope and via authorised C.Scope agents, cost effectively,
at your chosen location. C.Scope recommend operators are
trained before using the equipment.
Servicing
It is strongly recommended that the CXL3 and DXL3 Locators
and the SGA3 Signal Generator are serviced at least once
a year by an Authorised Service Centre to ensure performance
to specification. Contact your supplier for information.
Repairs
Before returning equipment suspected of being faulty, please
check the machine carefully with a fresh set of batteries.
Check the battery connections and rotate the batteries in
the holder. Refer to the section in this manual on Function
Checks and if possible substitute known good equipment as a
confirmation. If the problem persists then contact the company
from whom you purchased the equipment, or contact C.Scope
indicating the nature of the fault. Advice on the best course of
action can then be given.
