Mean Well HEP-2300 Series, Installation Manual, Page: 6 / 42

2
5
HEP-2300-55 MODEL
OUTPUT
BOOST CHARGE VOLTAGE Vboost 57.6V
55.2V
120 ~ 400AH
Open & Sealed Lead Acid
40A
FLOAT CHARGE VOLTAGE Vfloat
RECOMMENDED BATTERY
CAPACITY(AMP HOURS)
(Note 3)
BATTERY TYPE
OUTPUT CURRENT (max.)
INPUT
90 ~ 305VAC 250 ~ 431VDC
47 ~ 63Hz
PF>0.99/115VAC, PF>0.95/230VAC, PF>0.93/277VAC at full load
95.5%
13.3A / 115VAC 11A / 230VAC 9.3A / 277VAC
Cold start 60A/230VAC
<1.8mA Peak / 240VAC <2mA Peak / 277VAC
VOLTAGE RANGE
FREQUENCY RANGE
POWER FACTOR (Typ.)
EFFICIENCY (Typ.)
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
Note.5
ENVIRON-
MENT
PROTECTION
FUNCTION
-40 ~ + " ") 70 (Refer to Derating Curve
℃
20 ~ 95% RH non-condensing
-40 ~ +80 , 10 ~ 95% RH non-condensing
℃
± ℃ ℃)
0.03%/ (0 ~ 50
20 ~ 500Hz, 10G 12min./1cycle, period for 72min. each along X, Y, Z axes
Constant current limiting, unit will shutdown after 5 sec, re-power on to recover.
59 ~ 69.1V
Protection type :Shut down O/P voltage,re-power on to recover
Shut down O/P voltage, recovers automatically after temperature goes down
Power ON : Short circuit Power OFF : Open circuit
12V@0.5A tolerance 10%, ripple 150mVp-p
±
The TTL signal out, PSU turn on = 4.5 ~ 5.5V ; PSU turn off = -0.5 ~ 0.5V.
Please refer to the Function Manual
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SHORT CIRCUIT
OVER VOLTAGE
OVER TEMPERATURE
REMOTE ON/OFF CONTROL
AUXILIARY POWER
DC-OK SIGNAL
HEP-2300-55 series -
Charger
6
2
HEP-2300-115 HEP-2300-230
230V
HEP-2300-380
380V
MODEL
OUTPUT
INPUT
ENVIRON-
MENT
PROTECTION
FUNCTION
DC VOLTAGE (factory default) 115V
20A 10A 6.05A
20A 10.6A 6.9A
2300W 2300W 2300W
115 ~ 138V 216 ~ 260V 334 ~ 400V
1500mVp-p 1500mVp-p 4000mVp-p
By potentiometer VR
90 ~ 138V 170 ~ 260V 260 ~ 400V
±
1.0%
±
1.0%
±
1.0%
±
0.5%
±
0.5%
±
0.5%
±
0.5%
±
0.5%
±
0.5%
1800ms, 100ms/230VAC at full load
12ms/230VAC at full load
90 ~ 305VAC 250 ~ 431VDC
-40 ~ + " ") 70 (Refer to Derating Curve
℃
47 ~ 63Hz
20 ~ 95% RH non-condensing
PF>0.99/115VAC, PF>0.95/230VAC, PF>0.93/277VAC at full load
-40 ~ +85 , 10 ~ 95% RH non-condensing
℃
95% 95.5% 95.5%
± ℃ ℃)
0.03%/ (0 ~ 50
13.3A / 115VAC 11A / 230VAC 9.3A / 277VAC
20 ~ 500Hz, 10G 12min./1cycle, period for 72min. each along X, Y, Z axes
Cold start 60A/230VAC
<1.8mA Peak / 240VAC <2mA Peak / 277VAC
105 ~ 115% rated output power
Protection type : Constant current limiting, unit will shutdown after 5 sec. re-power on to recover
145 ~ 166V 273 ~ 312V 420 ~ 480V
Protection type :Shut down O/P voltage,re-power on to recover
Shut down O/P voltage, recovers automatically after temperature goes down
Power ON : Short circuit Power OFF : Open circuit
12V@0.5A tolerance 10%, ripple 150mVp-p
±
The TTL signal out, PSU turn on = 4.5 ~ 5.5V ; PSU turn off = -0.5 ~ 0.5V.
Please refer to the Function Manual
Adjustment of output voltage is allowable to 50 ~ 120% of nominal output voltage
Please refer to the Function Manual
Adjustment of constant current level is allowable to 20 ~ 100% of rated current
Please refer to the Function Manual
CURRENT (factory default)
RATED CURRENT (max.)
RATED POWER (max.)
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
HOLD UP TIME (Typ.)
VOLTAGE RANGE
WORKING TEMP.
FREQUENCY RANGE
WORKING HUMIDITY
POWER FACTOR (Typ.)
STORAGE TEMP., HUMIDITY
EFFICIENCY (Typ.)
TEMP. COEFFICIENT
AC CURRENT (Typ.)
VIBRATION
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
OVERLOAD
OVER VOLTAGE
OVER TEMPERATURE
REMOTE ON/OFF CONTROL
AUXILIARY POWER
DC-OK SIGNAL
OUTPUT VOLTAGE
PROGRAMMABLE(PV)
OUTPUT CURRENT
PROGRAMMABLE(PC)
FULL POWER VOLTAGE RANGE
RIPPLE & NOISE (max.)
VOLTAGE ADJ. RANGE
VOLTAGE TOLERANCE
Note.2
Note.4
Note.5
Note.7
Note.7
HEP-2300-115/230/380 series -Switching Power Supply