Mean Well HEP-2300 Series, Installation Manual, Page: 35 / 42

63
Bit 6 STGS：2/3 Stage Charge Setting
＝ 3 stage charge(default, CURVE_CV and CURVE_FV) 0
1＝ 2 stage charge (only CURVE_CV)
Bit 7 CUVE： Charge Curve Function Enable
0＝ disabled power supply mode(default) ,
1＝ enabled charger mode ,
High byte:
Bit 0 CCTOE： Constant Current Stage Timeout Indication Enable
＝ 0 disable (default)
1＝ enabled
Bit 1 CVTOE： Constant Voltage Stage Timeout Indication Enable
＝ 0 disable (default)
1＝ enabled
Bit 2 FTTOE： Float Voltage Stage Timeout Indication Enable
0＝ disable (default)
1＝ enabled
Note: Unsupported settings displays with "0"
◎
CHG_STATUS(0x00B8, only for charger) ：
Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0
High byte
Low byte
NTCER
CVM
BTNC
FVM
FVTOF CVTOF
-
CCTOF
- -
-
-
-
CCM
-
FULLM
Low byte
Bit 0 FULLM：
Fully Charged Mode Status
0＝ NOT fully charged
1＝ fully charged
Bit 1 CCM： Constant Current Mode Status
0＝ the charger NOT in constant current mode
1＝ the charger in constant current mode
Bit 2 CVM： Constant Voltage Mode Status
0＝ the charger NOT in constant voltage mode
1＝ the charger in constant voltage mode
6
64
Bit 3 FVM：Float Mode Status
0＝the charger NOT in float mode
1＝the charger in float mode
High byte:
Bit 2 NTCER：Temperature Compensation Status
0＝NO short-circuit in the circuitry of temperature compensation
1＝the circuitry of temperature compensation has short-circuited
Bit 3 BTNC：Battery Detection
0＝battery detected
1＝No battery detected
Bit 5 CCTOF：Time Out Flag of Constant Current Mode
0＝NO time out in constant current mode
1＝constant current mode timed out
Bit 6 CVTOF：Time Out Flag of Constant Voltage Mode
0＝NO time out in constant voltage mode
1＝constant voltage mode timed out
Bit 7 FTTOF：Time Out Flag of Float Mode
0＝NO time out in float mode
1＝float mode timed out
Note: Unsupported settings displays with "0"
6