Mean Well HEP-2300 Series, Installation Manual, Page: 30 / 42

53
byte2:
Bit :3 TEMPERATURE_1 Factor： 0 The Factor of internal ambient temperature
0x =internal ambient temperature relevant commands not supported 0
0x4=0.001
0x5=0.01
0x6=0.1
0x7=1.0
0x8=10
0x9=100
Bit 4:7 CURVE_TIMEOUT Factor： The Factor of CC/CV/Float timeout
0x = 0 CURVE_TIMEOUT relevant commands not supported
0x4=0.001
0x5=0.01
0x6=0.1
0x7=1.0
0x8=10
0x9=100
byte3:
Bit 0:3 IIN Factor： The Factor of AC input current
0x = 0 AC input current relevant commands not supported
0x4=0.001
0x5=0.01
0x6=0.1
0x7=1.0
0x8=10
0x9=100
6
54
◎
SYSTEM_STATUS (0x00C ) 1 ：
Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0
Low byte - - - EEPER
INITIA-
LSTATE
ADL_ON
DC_OK -
Low byte:
Bit 1 DC_OK：Secondary DD output voltage status
＝Secondary DD output voltage status TOO LOW 0
1＝Secondary DD output voltage status NORMAL
Bit 4 ADL_ON：Active dummy load control status
＝Active dummy load off/function not supported 0
1＝Active dummy load on
Bit 5 INITIAL_STATE：Device initialized status
＝In initialization status 0
1＝NOT in initialization status
Bit 6 EEPER：EEPROM data access error
＝EEPROM data access normal 0
1＝EEPROM data access error
Note: Unsupported settings displays with "0"
6