ISOBUS-TC task processing
Configuring the list of connections
9
30302710-02-EN
V7.20160121
65
1. Open the ISOBUS-TC application.
2.
– Open the screen with the list of connection.
⇨
The following screen will appear:
⇨
A list will appear with all of the equipment connected to the ISOBUS. The connectors
appear between the equipment.
3.
- Press the rotating knob in the top row in order to select the first device. If you are
using an ME terminal to which a GPS receiver is connected, insert the ME-Tractor-ECU
application in the top row. If another terminal or tractor job computer contains the geometry, you
can set this.
4. The agricultural implement which is connected to the rear ISOBUS socket should appear in the
second line. Select a device in the row for the second device.
5. You now only need to select the appropriate connector between the two devices. Press the
rotating knob in the line between two devices and select the appropriate connector for each
device.
In simple systems, the terminal can set up the list of connections automatically. In particular, when
the ME terminal is the only unit which contains the tractor geometry (see: Entering the position of the
GPS Receiver [
It can however still be necessary to set the list of connection manually in the following instances:
▪ If a tractor job computer (Tractor-ECU), in which the tractor geometry is saved, is mounted as an
independent job computer on the tractor. In this instance, you must decide which Tractor-ECU is
connected in the list of connections with other equipment: the application on the ME terminal or
on the tractor job computer.
▪ If the system cannot organize the ISOBUS job computer by itself. For example when more than
one implement is connected to the tractor (e.g.: slurry tanker and planter/seeder).
▪ When the connection to an ISOBUS job computer is interrupted during the start-up of a ISO-XML
task. In most cases, the list of connections will be set correctly as soon as you reconnect the
ISOBUS job computer.
▪ If this error message appears when starting the terminal: "List of connection is incomplete."
▪ When the following error message appears when starting a navigation in TRACK-Leader: "The
device data is still loading." The settings in the list of connections can eliminate this problem.
