MDF Rose Engine Lathe 2.0, Instructions Manual, Page: 9 / 64

MDF Rose Engine Lathe 2.0
Build Instructions – Stepper Controls
9
Item
# Item Qty Source
Source
Part Number Comments
403 Screws, #4-40, ¾ ” 4 McMaster-Carr 97763A322 If you take option #1 as outlined on
pg. 48, you should use these. If not,
they are not needed. These go with
#402, above.
404 M3 Screws, Thread Forming 4 McMaster-Carr 96817A300
405 Magnets 4 McMaster-Carr
or Amazon
5862K14 ½ ” outside diameter with hole in
center for attaching to an object via
a screw. Used on bottom of the 3D-
printed enclosure for the Nextion HMI
display
406 Sheet Metal Screws, #4,
3/4” long, round head
McMaster-Carr 90935A137 These work acceptably in the MDF for
the purposes they are designed to be
used.
407 Particle Board Screws, #6,
3/4” long, round head
McMaster-Carr 91555A115
408 Particle Board Screws, #6,
5/8” long, flat head
McMaster-Carr 90252A246
409 Sheet metal screws, #4,
5/16” long, flat head
McMaster-Carr 90065A107 Used to attach #405 magnets to the
3D-printed enclosure for the Nextion
HMI display.
410 Torx Round Head Thread-
Forming Screws for Plastic,
#4, 7/8” long
McMaster-Carr 96001A217 If you take option #2 as outlined on
pg. 48, you should use these. If not,
they are not needed.
Spindle Drive Parts
501 Timing Belt 1 MiSUMi GBN655EV5GT-90 GT3 5mm pitch
131T / 655mm long
9mm wide
502 Spindle Pulley 1 Colvin Tools Attached to the spindle via the
flange.